PO static dissipative bags
Product Description
PO static dissipative bags are ESD-control pouches made from polyolefin film coated with a compound anti-static layer that holds surface resistance between 10^6 and 10^10 ohms and dissipates any accumulated static charge within 2 seconds. Rather than relying on a temporary surface treatment that washes off with handling, the coating is built into the film so the dissipative range stays consistent through kitting, line transfer and storage. The film keeps a 99% moisture barrier and around 65% light transmission, so electronic contents are visible for inspection without the bag itself acting as a static generator. Sizes run from 8x10cm to 40x50cm at 0.1-0.2mm, covering small SMT parts, PCBs, connectors, sensors, hard drives and assembled modules that enter an electronics assembly line. The bags are manufactured under SJ/T 11465-2014, which is the standard buyers use to qualify ESD packaging for controlled areas, and buyers can select an up to 55% recycled-content blend where corporate sustainability requirements apply.
An ESD bag only protects a board if its resistance range and decay time stay inside spec batch after batch, which is why in-house film coating matters more than the quoted ohm number on a datasheet. Because we extrude and coat the PO film in the same factory, the 10^6-10^10 ohm range and <=2s decay are controlled at the film stage rather than added as a post-treatment, giving assembly lines a consistent ESD-rated pouch that does not drift after warehouse storage. The 65% transparency also lets operators verify part numbers and board revisions without opening the bag, which reduces ESD handling steps on the floor and lowers the chance of a discharge event. The optional 55% recycled blend lets procurement teams meet recycled-content targets on a packaging line that still has to perform to SJ/T 11465-2014, rather than choosing between compliance and sustainability.
Specifications
|
Parameter |
Specification |
|
Material |
PO with compound anti-static coating |
|
Surface Resistance |
10^6 - 10^10 ohms |
|
Static Decay Time |
<=2 seconds |
|
Moisture Barrier |
99% |
|
Light Transmission |
About 65% |
|
Size Range |
8x10cm to 40x50cm |
|
Thickness |
0.1-0.2mm |
|
Standard |
SJ/T 11465-2014 |
|
Recycled Option |
Up to 55% recycled content |
Applications
ESD Packaging for PCB and SMT Components.
The 10^6-10^10 ohm dissipative range and <=2s decay prevent charge build-up that would damage sensitive boards during kitting, board stuffing and rework in an assembly line.
Electronics Sub-Assembly and Module Transport.
The 99% moisture barrier protects sensors, connectors and drives from humidity during internal line transfer, while the semi-transparent film lets operators identify the part without unsealing the bag.
Warehouse and ESD Controlled Area Storage.
Standard sizes from 8x10 to 40x50cm cover reels, loose PCBs and finished modules, so a single bag family can be used across receiving, WIP and packing in an ESD-protected area.
Customization
We customise PO static dissipative bags across 8x10 to 40x50cm, with chosen gauge, tint, ESD resistance range within spec, printed ESD warning or logo, and an optional up to 55% recycled content. OEM and ODM are supported to drawing or sample, with mixed sizes within one MOQ.
Packaging & Transportation
Bags are packed in export carton boxes. Trade terms are negotiable; transit damage is replaced free of charge.
FAQ
Q1. What is the MOQ for ESD static dissipative bags?
A. The MOQ is 50,000 pieces, and different sizes can be mixed within that MOQ.
Q2. Can I get samples to verify the ESD performance?
A. Standard samples are free, while custom-developed samples are chargeable; custom sample development takes about 15 days.
Q3. What is the lead time and warranty?
A. Custom orders take about 15 days. Every order carries a 6-month warranty, we accept third-party inspection, and any goods damaged in transit are replaced.
Hot Tags: po static dissipative bags, China po static dissipative bags manufacturers, suppliers, factory, confectionery packaging bags, ESD PO bags, euro slot packaging bags plastic, gusseted polyolefin bags, PO Anti Static Bags, po plastic bags



